Autoclave cycle logHelix and spore testsPack-to-patient tracingBiomedical waste register

Dental sterilization log sheet and autoclave register, kept digitally

A dental sterilization log sheet records every autoclave cycle: date, sterilizer, cycle number, program, temperature, pressure, hold time, load, indicator result and operator. Dental Software India keeps that register on screen, logs Bowie-Dick, Helix and spore tests, traces each instrument pack to the patient it was used on, and keeps the daily biomedical waste register next to it, ready to print.

In short: Dental Software India replaces the paper autoclave register: staff log each cycle with its parameters and chemical indicator result, test cycles (Bowie-Dick or Helix, spore tests) are tracked with due dates, a failed cycle recalls its packs and lists patients already treated, and a daily biomedical waste register sits on the same screen. Monthly registers print for inspection. Log and waste register are in every plan from ₹1,499 a month; pack labels and tracing on Clinic and Chain.

Records what staff observed · does not validate sterilization · follow the manufacturer's instructions and your state's guidance

3cycles today
✓Helix today
2 dspore test due
0days without BMW entry
Autoclave A #3 · 134 °C · 2.1 bar · 4 min
Endo kit and files · 4 packs · CI class 5
Pass
Autoclave B #2 · 121 °C · 1.1 bar · 20 min
Extraction forceps · 6 packs
Failed · 6 packs recalled
Autoclave A #1 · Helix test
09:15 · operator Kavya
Pass
YellowRedWhiteBlue Sample data · sterilization dashboard

What a dental sterilization log sheet should record

The purpose of the log is simple: for any instrument used on any patient, the clinic can show the cycle that processed it and that the cycle met its parameters. That needs one row per cycle with these columns.

ColumnWhat to writeWhy
Date and timeWhen the cycle ranLinks the cycle to the patients treated after it
SterilizerWhich autoclave (Class B, N or S) or dry-heat unitClinics with two units must tell them apart
Cycle numberRunning number for the dayPrinted on pack labels for traceability
Program134 °C, 121 °C or the custom program usedDifferent loads need different programs
Temperature, pressure, hold timeAs read from the display or printoutShows the cycle reached its parameters
LoadContents and number of packsTells you what to recall if the cycle fails
Chemical indicatorClass (4, 5 or 6) and pass or failEvidence for each load
Test cyclesBowie-Dick or Helix, spore testEvidence that the sterilizer works
Operator and signatureWho ran and checked itAccountability

Dental Software India adds an optional photo of the cycle printout, notes, and the user who logged the cycle, and numbers cycles automatically per sterilizer per day.

Which tests to log and how often

Test frequencies come from your sterilizer's manufacturer and your state's infection-control guidance, so set them to match. The common pattern in dental clinics is:

  • Bowie-Dick or Helix test at the start of each day for vacuum (Class B) autoclaves, checking air removal and steam penetration. The dashboard shows whether today's test passed.
  • Chemical indicator in every load or pack, read before the packs are released. Class 5 and 6 indicators respond to more than one parameter.
  • Biological (spore) indicator periodically, often weekly. It is logged as "incubating" and the result added when it is read; the interval is a setting (7 days by default).
  • Service and maintenance as the manufacturer specifies; enter the next service date per sterilizer and get a reminder 14 days before.

Every evening the app sends an in-app reminder if no load cycle was logged, the spore test is overdue, the day's waste entry is missing, or a sterilizer service is due.

From cycle to patient: pack labels and traceability

When a load passes, Dental Software India creates a code for each pack, such as C-261104-A03-07 (date, sterilizer letter and cycle number, pack number), with an expiry date from your shelf-life setting. A label sheet prints 24 labels per A4 page. When a pack is opened, the assistant types or scans the code on the patient's tooth chart, and the pack is linked to the patient and that day's appointment. A barcode scanner works like a keyboard, so no driver is needed. Expired or recalled packs are refused with a message.

What to do when a cycle fails

If the indicator or a test fails, record the cycle as failed. Every pack from that load is marked recalled and cannot be used. If a spore test or Bowie-Dick test fails, packs from loads on that sterilizer since its last passed test are recalled too. Packs already used are listed on the dashboard with the patient's name and phone, so the dentist can decide on follow-up under your infection-control policy. Reprocess the instruments, and have the sterilizer checked before using it again.

Biomedical waste register on the same screen

The daily biomedical waste register records the weight or count per colour category under Schedule I of the Bio-Medical Waste Management Rules 2016 (as amended): yellow, red, white (translucent, for sharps) and blue (glass), plus categories you add, such as amalgam waste. Record the bags, the handover to your common biomedical waste treatment facility (CBWTF) with the collector and manifest number, and see a monthly summary that supports your annual report to the State Pollution Control Board. Days without an entry are flagged. Our guide to biomedical waste management in a dental clinic has the item-by-item colour table, and the dental clinic registration guide covers the authorisation itself.

Paper register, Excel or Dental Software India?

Paper registerExcel sheetDental Software India
Cycle numbers and parametersHandwrittenTypedNumbered automatically, parameters per cycle
Test due datesFrom memoryManualDashboard and evening reminders
Failed cycle recallManual searchManual searchPacks recalled, patients listed
Pack-to-patient tracingRarelyRarelyScan the pack on the chart
Biomedical waste registerSeparate bookSeparate sheetSame screen, monthly summary
Monthly print for inspectionThe book itselfIf formattedAutoclave and waste registers

Among Indian dental software, Oralzy also lists autoclave logs on its public pages (as of November 2026; check with the vendor).

Plans and price

The cycle log, test tracking, biomedical waste register, reminders and monthly printables are in every plan from ₹1,499 a month. Pack labels and pack-to-patient tracing need the Clinic plan (₹2,999 a month) or Chain. Prices exclude GST. See pricing, the sterilization log feature summary, and how records are kept on our security page. What it does not do: read data from the autoclave automatically, validate sterilization, or connect to a CBWTF system.

Frequently asked questions

What should an autoclave log book contain?

An autoclave log book should record, for every cycle, the date and time, the sterilizer, the cycle number, the program, the temperature, pressure and hold time from the display or printout, the load contents and number of packs, the chemical indicator result, any test cycles, the operator and a signature. Dental Software India records all of these.

How do you maintain an autoclave register in a dental clinic?

Log every cycle as soon as it ends, including the morning test cycle, read the indicator before releasing packs, record any failure and what you did with the load, and print the register each month for the inspection file. Dental Software India keeps the register digitally and reminds you about missing logs and spore tests.

How often should a spore test be done?

Follow the sterilizer manufacturer's instructions and your state's guidance; weekly biological (spore) testing is a common practice in dental settings. Dental Software India lets you set the interval (7 days by default), records each spore test as incubating until you enter the result, and shows when the next one is due.

What is a Bowie-Dick or Helix test?

A Bowie-Dick or Helix test is a test cycle, usually run at the start of the day in a vacuum (Class B) autoclave, that checks air removal and steam penetration using an indicator sheet or a hollow-load device. Dental Software India logs it as a test cycle with pass or fail and shows on the dashboard whether today's test passed.

What happens to instruments from a failed cycle?

They should not be used until reprocessed. When a cycle is recorded as failed in Dental Software India, every pack from it is marked recalled and refused if someone scans it, and the dashboard lists patients already treated with packs from that cycle so the dentist can decide on follow-up.

How long should sterilization records be kept?

Keep them for as long as your state rules and your inspector require. Dental Software India keeps every cycle, pack and waste entry for the life of the clinic account, and the monthly autoclave and biomedical waste registers can be printed or saved as PDF at any time.

Can the same screen keep the biomedical waste register?

Yes. Dental Software India has a daily biomedical waste register next to the cycle log: weight or count by colour category (yellow, red, white, blue and your own categories), bags, handover to the CBWTF with the manifest number, a monthly summary and a flag for days with no entry.

Start logging cycles in the free trial

Add your autoclaves, log tomorrow morning's Helix test and print this month's register before the next inspection.